|
|
| |
|
|
|
|
|
|
 Click to enlarge image
|
 Model Number |
C3100 |
| Brand Name |
Seintek |
|
Catalog |
Users Manual |
Software |
|
▣ Features |
-
Programmable Record (MAX / MIN): records and displays the MAX and MIN values of the input freq.
-
Programmable Relative (REF / ERR): displays reference frequency and the deviation of the measured frequency from the reference frequency as a % error.
-
Programmable Compare (GO-NOGO): the LCD will display PASS if the input frequency is with in the HI/LO limits, LO if the frequency is lower than the LO limit and HI if the frequency is higher than the HI limit.
-
Frequency range: CHC: 2.4GHz (CHA, B: 120MHz)
-
Measurement: FRQ. A, FRQ. B, FRQ. C, Time interval, Totalize, Ratio A/B, Difference Freq. (A-B), Duty cycle and RPM (See Model No.: C3100, C3110 or C3120)
-
Resolution: 7 Digits
-
Range: full Auto Range
-
Trend Plot: the REF is the centerline value on the trend graph, H/Div is the X axis (time) and V/DIV is the Y axis (amplitude).
-
Setup: setting and functions may be selected and stored in memory from the front panel. Eight setups may be stored in memory.
-
Equipment: displays information about your instrument including the Model number, serial number, Calibration date, GP-IB address and Firmware revision.
-
Remote Control: function and ranges may be controlled from a PC via the RS232 or the optional GP-IB interface.
-
Display: 128 by 64 pixel super twisted LCD display
-
Power Source: may be used with any line voltages from 85V to 270Vac (±10%, 48 to 66Hz) without any internal changes. |
 |
 |
 |
| Record |
Relative |
Compare |
 |
 |
 |
| Trend Plot |
Setup |
Equipment |
|
▣ Specification |
| CHA, CHB input Characteristics |
Freq. Range |
DC Coupled: 0 - 120MHz |
| AC Coupled: 10Hz - 120MHz |
| Sensitivity |
25mV rms (Sine Wave) |
| Coupling |
DC or AC |
| Impedance |
1Mohm less with less than 35pF capacitance |
| Attenuator |
0dB, 20dB |
| Maximum Input voltage |
250V (DC or AC Peak) |
| Trigger Slope |
Positive or Negative |
| Trigger Level |
-99 ~ +99 |
| Resolution |
0.00001Hz (G.T=1Sec, 200Hz) |
| CHC input Characteristics |
Freq Range |
100MHz - 2.4GHz |
| Sensitivity |
25mV rms (Sine Wave) |
| Coupling |
AC |
| Maximum Input voltage |
5V (DC or AC peak) |
Input
Channel |
CH A, CH B, CH C |
| Measurement Function |
9 (Nine) : FRQ.A, FRQ.B, FRQ.C, A→B (Time Interval), TOT.A (Totalize), Ratio A/B, A-B, DUTY. A and RPM A |
| GATE Times |
20: 50mS, 100mS, 200mS, 300Ms, 400mS, 500mS, 600mS, 700mS, 800mS,900mS, 1S, 2S, 3S, 4S, 5S, 6S, 7S, 8S, 9S, 10S |
| Reference Time Base Oscillator |
Standard Frequency: 10MHz
Frequency Stability: ±5.0ppm max.
Aging Rate: ±1.0ppm max/year
Temperature: -30°C~+60°C
Storage Temp. Range: -40°C~+85°C | |
|
|
▣ ACCESSORY |
|
⊙ Standard
|
1. User Manual
2. BNC cable (BNC & Clip)
3. Cord
4. Spare fuse
5. RS232 Cable (9Pin to 9Pin)
6. RS232 Program Software Diskette |
⊙ Option
|
1. GP-IB (IEEE-488.2) Interface (Installed) | |
|
|
|
|
| |
|
|
|
Related Keywords:
Bookmark / Share this page