|
|
| |
|
|
|
|
|
|
 Click to enlarge image
|
 Model Number |
S2401 |
| Brand Name |
Seintek |
- Dual channel and auto calibration.
- DC to 1MHz oscilloscope band width
- Sampling Time:
* Single CH Mode: 50Ms/S
* Dual CH Mode: 25Ms/S
- Automatic triggering.
- Automatic setting for horizontal and vertical divider
- Roll and single shot mode
- Excellent internal noise reduction
- Real time Update.
- Auto ranging.
- 16 shot waveform and setup memories
- Built-in auto ranging True-RMS digital multi-meter
- Data hold and run mode.
- Extra-bright back light display
- Low battery indication.
- Max. Voltage between any Input and Ground: DC or AC 600Vpeak
- RS-232 interfaces for transferring measurement data and waveform.
- Display Type: super-twist 132 x 128 pixels
- Designed to comply with safety standard for UL3111, CSA C22.2 No.1010-1
|
Technical Specifications
Horizontal
| Sample Rate |
25 Meg-samples per second (Dual CH mode) |
| 50 Meg-samples per second (Single CH mode) |
| Record Length |
512 in single shot and glitch capture mode
256 in all other modes. |
| Sample / Division |
25 |
| Update Rate |
Real time |
| Modes |
Single shot, Roll, Normal |
| Accuracy |
0.01% |
| Sweep Rate |
1uS to 5S in 1, 2, 5 sequence |
Vertical
| Bandwidth |
1MHz |
| Resolution |
8 Bit |
| Channels |
Dual |
| Coupling |
AC, DC |
| Input impedance |
1 Mⅴ |
| Accuracy |
3% |
| Max. Input Volts |
DC or AC600Vp-p |
| Volt / Division |
0.5V to 500V in 1, 2, 5 sequence |
Triggering
| Type |
Internal, External |
| Coupling |
AC, DC |
| Slope |
Rising or Falling edge |
| Internal Trigger Sensitivity |
2/20 Division |
Other
Digital Multi-Meter Function
DC V
| Range |
Resolution |
Accuracy |
Impedance |
| 5V |
0.001V |
첸 (0.3%+3) |
1 Mⅴ |
| 50V |
0.01V |
| 500V |
0.1V |
| 1000V |
1V |
AC V
| Range |
Resolution |
Accuracy |
Impedance |
| 50Hz~450Hz |
0.45kHz~5kHz |
5kHz~200kHz |
| 3V |
0.001V |
첸0.75%+5) |
첸2%+5) |
첸2.5%+5) |
|
| 30V |
0.01V |
| 300V |
0.1V |
| 750V |
1V |
N/A |
OHM
| Range |
Resolution |
Accuracy |
Over Load Protection |
| 5 kⅴ |
0.001 kⅴ |
첸0.5% +5) |
600V DC or
AC Peak |
| 50 kⅴ |
0.01 kⅴ |
| 500 kⅴ |
0.1 kⅴ |
| 5 Mⅴ |
0.001 Mⅴ |
첸0.75%+10) |
Continuity Test
| Test Voltage |
Max. Test Current |
Over Load Protection |
|
1.7V |
100 digits |
600V DC or AC Peak |
Frequency
| Range |
Resolution |
Accuracy |
Over Load Protection |
| 100 Hz |
0.01 Hz |
첸 (0.5% +5) |
600V DC or
AC Peak |
| 1 kHz |
0.0001 kHz |
| 10 kHz |
0.001 kHz |
| 100 kHz |
0.01 kHz |
| 1 MHz |
0.0001 MHz |
RPM
| Function |
Range |
Resolution |
Accuracy |
| RPM |
240~60,000 |
1RPM |
첸 (0.5% +5) |
| % Duty, Cycle |
25% ~ 75% (30 RPM to 19,000 RPM, Pulse Width > 0.5mS) |
| Pulse Width |
0.2 ~ 1999.9mS (30 RPM to 19,000 RPM, Pulse Width > 0.5mS) |
General
| Power Requirement |
Ni-MH Battery 4.8V(1.2V x 4cell) |
| Battery Life Time |
4 Hours with Backlight off, Hours with Backlight on |
| Dimension /Weight |
90(W) x 195(H) x 40(D) mm /About 260g |
| Standard Accessories |
Users Manual, Test Leads (2), Ni-MH Battery Pack, AC Power & Rechargeable Adaptor, Rubber Holster, Carrying Case, RS232 Cable & S/W |
| Optional Accessories |
Inductive Pick-up, Capacity Pickup |
Packing Details
| Packing |
Q`ty |
Size(mm) |
N.W(Kg) |
G.W(Kg) |
|
Inner |
1 |
290(L) x 270(W) x 80(H) |
- |
2.5 |
|
Carton |
5 |
420(L) x 270(W) x 330(H) |
12.5 |
14 |
|
|
|
|
| |
|
|
|
Related Keywords:
Bookmark / Share this page